Cost-Effective Protection that SAVES YOU MONEY!
Applications include mining,
agriculture, construction, crash/fire/rescue and more.
NIOSH says "The uni-directional design is
easy to incorporate and should be considered for all new and retrofit
systems in surface mining equipment."
RESPA-SDX's uni-directional design was field tested for several years
with NIOSH. Read
the full article.
"We installed the RESPA-SDX, sealed the
cab and realized a 425% reduction in DPM levels. We went from being out of compliance with the 160 micrograms/m3
per 8 hour day down to 32 micrograms/m3. This brought the cab into compliance. .
. the operator after 250 hours of run time in the cab could not believe
how clean the cab had remained. . . . the cost of the
RESPA-SDX was a lot less than an MSHA fine. Anything we can do
to protect our operators and keep MSHA happy is a good thing but the
cost of this system is so low, compared to any other alternative, it is
a great thing!"
-- Underground Mine Manager, Pennsylvania
This integrated, cost-effective product
combines precleaning with fresh & recirculated air filtration,
working with the HVAC unit to pressurize the cab for your operator's
system for reducing operator exposure to harmful airborne debris.
Integrated: Compact, lightweight units combine a
powered precleaner, engineered filtration and a cab pressure sensor,
while occupying a minimal footprint.
Powered Precleaner: This amazing device removes
debris BEFORE air passes over the filter, dramatically extending filter
16 filter for both fresh and recirculated air reduces operator
exposure to respirable silica, DPM, and other common airborne
Pressurizer: Works in conjunction with HVAC blower
to maintain positive pressure which prevents debris from entering cab;
sensor alerts operator to drops in pressure.
See how much YOU can save by
using the online Respa/Gideon
Technology Savings Calculator.
Compact, lightweight units allow for a variety of configurations to
work with machine and cab designs.
- Dimensions: Includes
two units; one for fresh air intake and another for recirculated air.
Each unit is approximately 10.5"W x 27"L x 10.25"H and weighs under 11
pounds including filter. (26.67 cm W x 68.58 cm L x 26.04 cm H and
weighs less than 5 kg with filter)
Filter media is tested and meets ASRAE MERV 16+ standards.
- Operation range ideal: 25-75 CFM (0.71-2.12 m3/m).
- Operation range extended: up to 100 CFM (2.83 m3/m).
- Operating temperature: -40 C to +80 C continuous; +100 C
Glass-filled, injection molded, polypropolene exterior; metal fan
blades; 80 watt 12V or 24V DC motor with sealed ball bearings.
- Cab Pressurization:
Maintains cab pressurization over extended operating periods, even when
HVAC system is off.
- Pressure Monitor:
Available cab pressure monitoring unit alarms when pressure drops below
0.2 inches WC (0.049 kPa) ensuring that operators are working in a protected
environment. May be required in some environments to meet government