Sy-Klone International   Support | Contact | Account
The Real World Is Our Laboratory!
 
Search Sy-Klone:   
Where to Buy: Sy-Klone Solutions Providers  
 
 


Home



Home > News & Case Studies > Universal Precleaner Mounting Kits Bring the Air Intake ABOVE the Hood!

Universal Precleaner Mounting Kits Bring the Air Intake ABOVE the Hood!

Sy-Klone “knocks it out of the park” with its NEW Universal Precleaner Mounting Kit

Dateline -- March 5, 2010
Sy-Klone International, manufacturer of advanced atmospheric ejective precleaner systems, has created a mounting kit for bringing air intake above the hood. In response to years of complaints from excavator and skid steer owners about short filter life and batteries being ruined by dump valves, Sy-Klone has developed a truly universal mounting kit that allow the intake system to be put above the hood, taking advantage of cleaner, cooler air and allowing for the dump valve to be permanently capped off. This also enables the installation of an air precleaner, such as our Series 9000, on machines where this was never possible before.

Our customers are pretty excited about it:

“This is the one of the most innovative kits I have ever seen, Sy-Klone thought of everything in putting this kit together, I even like the DVP Caps, so much easier to work with!”
-- T.J. - Komatsu Mechanic - Florida, USA

“We have been complaining to our engineering department for years about the dump valves constantly dropping dirt onto our batteries. When I voiced this concern to the Sy-Klone guy I had no idea that they would actual solve the problem. I am in shock.”
-- Engineer at major equipment manufacturer

“Wow, you guys nailed this one. The installation instructions are amazing and the technical support including the installation slideshow on your website have made this a no brainer.”
-- A.Z. - Ag Machine Mechanic - California, USA

“Skid steers are the worst for filter life; I have been beat up for years because of the skid steer intake being in the engine compartment. I am no mechanic and yet even I was able to install the precleaner above the hood on a skid steer, with this kit. I did not think that it could be done, they proved me wrong. My customer is ecstatic!”
-- Z.T. - Parts Sales and Service Representative -Midwest, USA

Made for 3-inch (76.2 mm) , 4-inch (102.38mm), 5-inch (127.29mm) , 6-inch (153.74 mm) and 8-inch (204.77 mm) filter housing inlet sizes, this kit provides all of the parts necessary to move the air inlet to a flat surface on the outside of the machine. Check out the installation slideshow, installation instructions, etc. at www.sy-klone.com.


Related Item(s)

KT0003 Universal Mounting Kit for Series 9000 3-inch Precleaner takes air intake above the hood
KT0004 Universal Mounting Kit for Series 9000 4-inch Precleaner takes air intake above the hood
KT0005 Universal Mounting Kit for Series 9000 5-inch Precleaner takes air intake above the hood
KT0006 Universal Mounting Kit for Series 9000 6-inch Precleaner takes air intake above the hood
KT0008 Universal Mounting Kit for Series 9000 8-inch Precleaner takes air intake above the hood
TR-S9-KT-KITS Series 9000 Universal Mounting Kit Installation Slideshow